Whirlpool WED560LHW Dryer Common Problems and Troubleshooting

Welcome to our guide on troubleshooting common problems with the Whirlpool WED560LHW Dryer. If you own this reliable and innovative dryer model, you understand the importance of efficient and trouble-free drying. In this article, we’ll explore potential issues that may arise and provide solutions to keep your Whirlpool WED560LHW operating at its best. Whether you’re experiencing challenges with its features or seeking preventive maintenance tips, we’ve got you covered.

Table of Contents

Toggle

Whirlpool WED560LHW Dryer Overview

The Whirlpool WED560LHW Dryer is a high-performance appliance designed to make your laundry routine easier and more effective. With a generous capacity of 7.4 cu. ft., this electric dryer offers advanced moisture sensing to prevent overdrying, a Wrinkle Shield™ option to keep your clothes wrinkle-free, and intuitive controls that guide you to the right cycle combinations. The Quad Baffles ensure efficient drying for small loads, and the dryer is ENERGY STAR® certified for energy efficiency. With features like reversible door and end-of-cycle signal, the Whirlpool WED560LHW is a versatile and reliable addition to your laundry room.

Causes of Common Problems with the Whirlpool WED560LHW Dryer

Discover the reasons behind common issues with your Whirlpool WED560LHW Dryer and find effective troubleshooting solutions in the sections below.

Common Problems with Whirlpool WED560LHW Electric Dryer

1. Drying Takes Longer Than Usual

Description: The dryer is taking an extended amount of time to dry clothes, leaving them damp or not fully dried.

Cause: There may be a lint build-up in the lint filter or venting system, reducing airflow and efficiency.

Troubleshooting:

• Clean the lint filter before each use to ensure proper airflow.
• Inspect and clean the venting system to remove any obstructions.
• Ensure the dryer is not overloaded, as this can impact drying performance.

2. Dryer Not Heating Up

Description: The dryer drum is turning, but there is no heat produced during the drying cycle.

Cause: The heating element or thermal fuse may be faulty, disrupting the heating process.

Troubleshooting:

• Check for blown fuses or tripped circuit breakers in your home’s electrical panel.
• Inspect the heating element for visible damage and replace if necessary.
• Verify that the dryer is receiving adequate power supply.

3. Unusual Noises During Operation

Description: The dryer produces loud or unusual noises while in operation, such as banging or squeaking sounds.

Cause: Foreign objects, worn-out drum support rollers, or a damaged belt can lead to unusual noises.

Troubleshooting:

• Inspect the drum for loose or foreign objects and remove them.
• Check the drum support rollers for wear and replace if necessary.
• Examine the belt for signs of damage and replace if needed.

4. Clothes Coming Out Wrinkled

Description: Clothes are consistently coming out of the dryer with wrinkles, despite using the appropriate settings.

Cause: Overloading the dryer or using incorrect settings may lead to inadequate tumbling and wrinkling.

Troubleshooting:

• Ensure the dryer is not overloaded, allowing proper tumbling space.
• Use the appropriate fabric care settings for different types of clothing.
• Consider using the Wrinkle Shield™ option for better results.

5. Drum Not Turning

Description: The dryer is powered on, but the drum is not turning during a drying cycle.

Cause: A broken belt or faulty motor may prevent the drum from turning.

Troubleshooting:

• Check the drive belt for signs of damage and replace if broken.
• Inspect the motor for any faults and replace if necessary.
• Ensure the dryer door is securely closed, as it will not operate with an open door.

6. Excessive Vibration During Operation

Description: The dryer exhibits excessive vibration or shaking while in operation, causing potential noise and instability.

Cause: Unbalanced loads or leveling issues may contribute to excessive vibration during the drying cycle.

Troubleshooting:

• Ensure the dryer is on a level surface and properly leveled.
• Distribute the load evenly inside the drum to avoid unbalanced conditions.
• Check for any foreign objects or obstructions that may affect the balance.

7. Foul Odor Inside the Dryer

Description: Unpleasant smells emanate from the dryer during or after a drying cycle, affecting the freshness of the laundry.

Cause: Accumulation of lint, debris, or mold growth inside the dryer can lead to foul odors.

Troubleshooting:

• Clean the lint filter and trap after each use to prevent odor buildup.
• Inspect and clean the drum, especially around the door seal, for any trapped debris.
• Run a cycle with a mixture of vinegar and water to eliminate potential mold growth.

8. Inconsistent Drying Results

Description: Clothes come out inconsistently dried, with some items still damp while others are overdried.

Cause: Sensor malfunctions, improper loading, or airflow issues can result in uneven drying.

Troubleshooting:

• Ensure the moisture sensors are clean and functioning properly.
• Separate heavy and lightweight items to promote more even drying.
• Check the venting system for any blockages that may affect airflow.

9. Display or Controls Not Responding

Description: The display panel or controls on the dryer are unresponsive, preventing proper operation.

Cause: Electrical issues, faulty control board, or sensor malfunctions can lead to unresponsiveness.

Troubleshooting:

• Check the power supply and ensure the dryer is properly connected to electricity.
• Restart the dryer by unplugging it for a few minutes and then reconnecting.
• If issues persist, consult the user manual for control board reset instructions.

10. Unusual Smells During Operation

Description: Strange or burning odors emit from the dryer during a drying cycle, causing concern.

Cause: Overheating, lint accumulation, or foreign objects in the exhaust system can lead to unusual smells.

Troubleshooting:

• Inspect the exhaust vent for any blockages or obstructions.
• Clean the lint filter and trap thoroughly to prevent overheating.
• Ensure the dryer is not overloaded, as this can contribute to overheating.

11. Door Seal Damage

Description: The door seal of the dryer is damaged or worn, leading to potential heat loss and decreased efficiency.

Cause: Wear and tear over time, improper use, or foreign objects caught in the seal can cause damage.

Troubleshooting:

• Inspect the door seal for visible signs of wear, tears, or damage.
• Replace the door seal if necessary with a genuine Whirlpool replacement part.
• Ensure the door is closed properly during operation to prevent additional stress on the seal.

12. Unresponsive Buttons on the Control Panel

Description: Some buttons on the control panel are unresponsive or difficult to operate, hindering the user interface.

Cause: Dirt, moisture, or wear on the control panel buttons can impact responsiveness.

Troubleshooting:

• Clean the control panel with a soft, dry cloth to remove any dirt or residue.
• Avoid using excessive force when pressing buttons to prevent damage.
• If issues persist, consult the user manual for specific cleaning instructions or consider professional service.

13. Excessive Lint Inside the Drum

Description: Lint accumulates inside the drum, potentially transferring onto clothes and reducing dryer efficiency.

Cause: Lint filter damage, improper use, or overloading can contribute to excessive lint inside the drum.

Troubleshooting:

• Regularly clean the lint filter after each drying cycle to prevent lint buildup.
• Inspect the lint filter for any damage and replace if necessary.
• Avoid overloading the dryer to minimize lint transfer onto clothes.

14. Noisy or Squeaking Idler Pulley

Description: A persistent squeaking or grinding noise is heard during operation, indicating a potential issue with the idler pulley.

Cause: Worn-out or damaged idler pulley components can lead to noisy operation.

Troubleshooting:

• Inspect the idler pulley for signs of wear, such as fraying or misalignment.
• Apply a small amount of lubricant to the idler pulley components to reduce friction.
• If the noise persists, consider replacing the idler pulley assembly.

15. Dryer Not Turning Off at the End of Cycle

Description: The dryer continues running even after the drying cycle is complete, potentially wasting energy.

Cause: Timer or control board malfunctions may prevent the dryer from automatically shutting off.

Troubleshooting:

• Manually turn the dryer off and unplug it to reset the controls.
• Check for any visible damage to the timer or control board components.
• If the issue persists, consult the user manual for resetting the timer or consider professional service.

16. Excessive Lint in the Venting System

Description: Lint accumulates in the venting system, reducing airflow and potentially posing a fire hazard.

Cause: Lack of regular maintenance or a blocked vent can lead to lint buildup in the venting system.

Troubleshooting:

• Clean the venting system regularly, including the vent hose and exterior vent opening.
• Ensure the venting system is not obstructed by furniture or other objects.
• Consider using a vent cleaning brush to remove stubborn lint from the vent hose.

17. Clothes Static or Clinging

Description: Clothes come out of the dryer with static electricity, causing them to cling together.

Cause: Overdrying, dry air, or the use of fabric softeners or dryer sheets can contribute to static issues.

Troubleshooting:

• Reduce overdrying by using the appropriate moisture settings for different fabrics.
• Add a fabric softener sheet or use dryer balls to reduce static buildup.
• If possible, adjust the humidity level in the laundry area to minimize static.

18. Drum Light Not Working

Description: The interior drum light fails to illuminate during operation or when the door is opened.

Cause: A faulty bulb, wiring issues, or a malfunctioning door switch may be the cause of the drum light failure.

Troubleshooting:

• Check if the bulb is burnt out and replace it with the appropriate type if needed.
• Inspect the wiring and connections for any visible damage or loose connections.
• If the issue persists, test the door switch and replace it if necessary.

19. Condensation Inside the Drum

Description: Moisture or condensation forms inside the drum even when the dryer is not in use.

Cause: Improper ventilation, high humidity, or a damaged door seal can contribute to condensation issues.

Troubleshooting:

• Ensure the venting system is properly installed and venting to the outside.
• Check the door seal for any visible damage and replace it if necessary.
• If humidity is high, consider using a dehumidifier in the laundry area to reduce moisture levels.

20. Error Messages on the Display

Description: The dryer display shows error messages or codes, indicating a malfunction or issue.

Cause: Sensor malfunctions, electrical issues, or component failures may trigger error messages on the display.

Troubleshooting:

• Refer to the user manual for a list of error codes and their corresponding troubleshooting steps.
• Check for loose connections, damaged sensors, or visible issues on the control board.
• If unable to resolve the issue, contact Whirlpool customer support or a certified technician for assistance.

21. Door Difficult to Close or Seal Properly

Description: Difficulty in closing the dryer door or achieving a proper seal, potentially leading to heat loss.

Cause: Misalignment, wear on the door latch, or debris hindering the door seal can cause closure issues.

Troubleshooting:

• Inspect the door latch for wear or damage and replace if necessary.
• Clean the door seal to remove any lint or debris that may affect the seal.
• Ensure the door is properly aligned with the frame for a secure closure.

22. Intermittent Power Loss

Description: The dryer experiences intermittent power loss or shutdown during operation.

Cause: Electrical issues, loose connections, or power supply problems can result in intermittent power loss.

Troubleshooting:

• Check the power cord and outlet for any visible damage or loose connections.
• Verify that the dryer is connected to a stable and dedicated power supply.
• If issues persist, consult an electrician to inspect the electrical system.

23. Unusual Odors from Vent Opening

Description: Unpleasant or burning smells are noticeable from the vent opening during operation.

Cause: Overheating, lint accumulation, or foreign objects in the exhaust system can lead to unusual odors.

Troubleshooting:

• Inspect the exhaust vent for any blockages or obstructions causing the odor.
• Clean the lint filter and trap thoroughly to prevent overheating and odors.
• Ensure the dryer is not overloaded, as this can contribute to overheating.

24. Inconsistent Timer Operation

Description: The timer does not consistently advance through the drying cycle or gets stuck at a particular point.

Cause: Timer motor malfunctions, faulty wiring, or control board issues can affect timer operation.

Troubleshooting:

• Inspect the timer motor for visible damage or signs of wear and replace if necessary.
• Check for loose or damaged wiring in the timer circuit and repair as needed.
• If problems persist, consider replacing the timer or consulting a technician for assistance.

25. Dryer Produces Excessive Heat

Description: The dryer generates more heat than usual, potentially leading to overheating and damage.

Cause: Restricted airflow, thermostat malfunctions, or electrical issues may cause excessive heat.

Troubleshooting:

• Ensure the venting system is clean and free from blockages to allow proper airflow.
• Check the thermostat for proper functioning and replace if necessary.
• If the issue persists, consult a professional technician for further diagnosis.

Whirlpool WED560LHW Dryer User Reviews

Welcome to the user reviews section for the Whirlpool WED560LHW Electric Dryer. Here, we’ll explore the experiences and feedback shared by users who have chosen this dryer for their laundry needs. Whether it’s the efficiency, features, or overall performance, let’s delve into what users are saying about the Whirlpool WED560LHW.

Positive Reviews from Whirlpool WED560LHW Electric Dryer Users

While opinions may vary, many users of the Whirlpool WED560LHW Electric Dryer have expressed satisfaction with certain aspects of their experience. Here are some common positive sentiments shared by users:

• Efficient Drying Performance: Some users were satisfied with the efficient drying performance of the Whirlpool WED560LHW, highlighting its quick-dry feature and ability to dry clothes without overdoing it.
• Advanced Features: The dryer’s advanced features, such as the drying sensor and customizable cycles, received positive feedback from users who appreciated the flexibility and convenience they offer.
• Quiet Operation: Several users praised the Whirlpool WED560LHW for its quiet operation, making laundry time less disruptive and more pleasant.
• Durable Build: Users mentioned the durable build of the dryer, with some noting that they have been using it for an extended period without encountering significant issues.
• User-Friendly Design: The user-friendly design and easy-to-follow instructions of the Whirlpool WED560LHW were highlighted by some users, contributing to a positive overall experience.

These positive reviews collectively indicate a general satisfaction among users with the performance, features, and design of the Whirlpool WED560LHW Electric Dryer.

Negative User Reviews of the Whirlpool WED560LHW Electric Dryer

• Design Flaws:
  
  Some users expressed dissatisfaction with design flaws, citing issues with cheap internal parts. One user reported a design flaw and shared photos with Whirlpool, requiring external intervention to address the problem.
• Noisy Operation:
  
  Several users complained about excessive noise levels during operation, even with the washroom door shut. This negatively impacted the overall user experience and satisfaction.
• Incomplete Drying:
  
  Users reported disappointment in the dryer’s performance, stating that clothes didn’t dry fully within the expected time frame. This issue led some users to extend drying cycles consistently.
• Control Panel Issues:
  
  Some users faced problems with the control panel, including unresponsive buttons and visible moisture inside. This resulted in the dryer not powering on, erratic flashing error codes, and inaccurate timer readings.

These negative user reviews highlight significant concerns related to design, noise, drying performance, and control panel functionality. Users experienced difficulties that impacted the overall satisfaction with the Whirlpool WED560LHW Electric Dryer.

Despite the negative feedback outlined above, it is essential to note that the majority of users expressed satisfaction with the Whirlpool WED560LHW Electric Dryer. While some users faced specific issues, others reported positive experiences, indicating that individual preferences and expectations may vary.

Whirlpool WED560LHW Dryer Manual

The operating instructions for the Whirlpool WED560LHW Electric Dryer can be found in the official Whirlpool WED560LHW Dryer Manual.

Whirlpool WED560LHW Electric Dryer Frequently Asked Questions

1. Why is my dryer making excessive noise during operation?

The excessive noise may be due to various factors, such as loose parts or worn components. To address this issue, check for any loose screws or objects inside the drum and ensure that the dryer is on a stable surface.

2. How can I resolve issues with incomplete drying?

If your clothes are not drying fully, make sure the lint screen is clean, and the venting system is free of obstructions. Additionally, consider adjusting the drying cycle settings based on the fabric type and load size for optimal results.

3. What should I do if my control panel is unresponsive?

If the control panel is not working correctly, try resetting the dryer by unplugging it for a few minutes and then plugging it back in. If the issue persists, consult the manual for troubleshooting steps or contact Whirlpool customer service for assistance.

Conclusion

For any problems with your Whirlpool WED560LHW Electric Dryer, it is advisable to consult the manual for troubleshooting guidance. In case of persistent issues, reach out to Whirlpool customer service or an authorized service center for professional assistance.

Please replace “manufacturer_website_link” with the actual website link for the Whirlpool WED560LHW Dryer manual.
Whirlpool WED5620HW Common Problems

Whirlpool WED6120HW Common Problems

Whirlpool WED6150PB Common Problems